Airmar 300WX Installationshandbuch PDF herunterladen (Seite 31)

CA/CR40/42/50/52 Installation manual Chapter 11

11.12.2 Mounting of scanner

Deciding the place of installation, a minimum distance must be considered to the

master compass (2 meters) and steering compass (1.4 meters). If a mount base

like the one shown below is available, it may be easier to install the scanner.

If not available, you may install the scanner directly to the roof, etc. In this case,

pay attention to the water drain tube located at the bottom of the scanner unit

during installation.

) When the radar mast or mounting bracket has a curvature of more than 2mm,

repair it or use spacers.

Which size bolts to use for mounting of scanner unit:

Thickness of mount base Bolt requirement Material Remarks

1-4mm(0.04-0.16 in.)

M10 × 15 (1.5mm pitch)

Steel

4-9mm(0.16-0.35 in.)

M10 × 20 (1.5mm pitch)

Steel

9-14mm(0.35-0.55 in.)

M10 × 25 (1.5mm pitch)

Steel Included with radar

14-19mm(0.55-0.75 in.)

M10 × 30 (1.5mm pitch)

Steel

Mount base. Do not use an edge that might trap water.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Keine Kommentare

Airmar 300WX Installationshandbuch Seite 31